Here's the full Video You Requested…

 

How to Trim Sails with Carol Hasse, Part 1 – Parts & Points of Sail

All Videos » Boat Handling » How to Sail

October 6, 2014

Knowing the parts and points of sail is important in deepening the understanding of sailing and how to trim sails. In the first of our How to Trim Sails series, master sailmaker Carol Hasse teaches the basics.

Navigate Further...

Carol Hasse is the owner and proprietor of Port Townsend Sails.

OTHER VIDEOS WITH CAROL HASSE:

How to Trim Sails, Part 2 - The Headsail

How to Trim Sails, Part 3 - The Mainsail

Sails for Blue Water Cruising

A Good Boat, Up Close, the Nordic Folkboat LORRAINE

DOWNLOADS:
Points of Sail Guide: click here for the OCH downloadable PDF.


Also appears in: Pacific Northwest, Women at the Helm

Comments, Thoughts or Suggestions?

You can leave a comment or question for OCH and members below. Here are the comments so far…

9 Responses So Far to “How to Trim Sails with Carol Hasse, Part 1 – Parts & Points of Sail”:

  1. […] refreshing is this great series on trimming sails. Just good, straightforward information, presented in OCH’s trademark […]

  2. James Purdy says:

    She is very informative and clearly covers topics not usually mentioned in other videos.

    It’s late November and I can’t wait to test her points. In RI, that will be a while.

  3. Keith Cheney says:

    Yes, David’s comment (below) is spot on. This is a very informative video that should be seen by new and experienced sailors alike. Thank you, Carol, for a great video series!

  4. Shaun Wallace says:

    I have yet to build my first boat, but having inherited an industrial strength sewing machine have built two sets of sails myself. However, not until watching Carol’s simple explanation did I understand the relationship of warp, fill, and bias. Needless to say my first set of sails were a terrific lesson in how to fail at constructing a sail. The main setup pitifully largely due to my misunderstanding of bias. The jib was a better attempt though the chamber was minimal. My second set was a kit with pre-cut panels, and what a world of difference. The warp and fill were oriented properly, and the built-in chamber propels my boat noticeably faster. Ironically I still did not comprehend what was making the new sails better. Thank you Carol! In 12 minutes you have helped the puzzle pieces fall together.
    For those of you considering constructing you own sails, I highly recommend the process.

  5. Edward Childs says:

    What is the easiest way to measure the camber to chord ratio on an existing sail if you don’t have the original spec from the sail maker?

  6. Paul Atkins says:

    I’ve been sailing for over thirty years and though I knew all of this, but drinking in this great series of videos always teaches me something. Thankyou! I am treating this site like a box of the best chocolates, savouring every post.

  7. Peter Brackenbury says:

    I agree with David. A wonderful intro to a topic that can be intimidating to a person like me.

  8. David Gruendel says:

    I’ve certainly never run across a more instructive 12 minutes on sail construction and trim. As usual, Carol is very impressive. I look forward to part 2, and hopefully more thereafter.

Leave a Comment

You must be logged in to post a comment.