All Videos » Building OONAGH / ARRIBA

Title
Building the Oonagh Sailing Rowing Skiff, Part 17 – Transoms, Knees, & Inwales: Transoms, Knees and Inwales are the topics illustrated in Building Oonagh Part 17....
Building the Oonagh Rowing/Sailing Dinghy, Part 16 – The Mast Step & Partner: Setting the mast step and mast partner. NOTE: This video series is currently being edited and the release schedule is ro...
Building the Oonagh Rowing/Sailing Dinghy, Part 15 – The Daggerboard Trunk: Kit gives us the lowdown on a clean and solid installation of the daggerboard trunk. NOTE: This video series is currentl...
Building the Oonagh Rowing/Sailing Dinghy, Part 14 – Bulkheads & Compartments: See how Oonagh’s various bulkheads and compartments go together that help make her the the appealing boat she is....
Building the Oonagh Rowing/Sailing Dinghy, Part 13 – Setting up the Bulkheads: Setting up the bulkheads and making sure they are straight and level will assure you that the molds go in straight and l...
Building the Oonagh Rowing/Sailing Dinghy, Part 12 – Final Bits on the Hull’s Exterior & Flipping the Boat: Locating the upper and lower guards and setting the waterline precedes flipping Oonagh over and giving us a look at her...
Building the Oonagh Rowing/Sailing Dinghy, Part 11 – The Upper & Lower Guards: Kit shows us how to install the side guards for practicality and grace.    ...
Building the Oonagh Rowing/Sailing Dinghy, Part 10 – The Outer Keel: Installing the outer keel is the next step in building Oonagh....
Building the Oonagh Rowing/Sailing Dinghy, Part 9 – Hanging the Sheer Plank: Interesting tips on hanging Oonagh’s sheer plank. NOTE: You can use this video to see how the first topside plank woul...
Building the Oonagh Rowing/Sailing Dinghy, Part 8 – Protecting the Bottom: Rolling epoxy into the layer of dynel cloth sheathing Oonagh’s bottom. NOTE: If you're new at this, we HIGHLY recommen...
Building the Oonagh Rowing/Sailing Dinghy, Part 7 – Attaching the Bottom Planks: Oonagh gets her first bottom planks. NOTE: This video series is currently being edited and the release schedule is rough...
Building the Oonagh Rowing/Sailing Dinghy, Part 6 – Preparing for Planking: Fitting the garboard planks snuggly against the keel calls for cutting a precise bevel.    ...
Building the Oonagh Rowing/Sailing Dinghy, Part 5 – Scarfing Planks Together: To make planking joints are secure and fair, they should be carefully sanded to achieve a precise dry fit before the epo...
Building the Oonagh Rowing/Sailing Dinghy, Part 3a – Milling Boards Straight: Turning wagglers into straight shooter — sometimes you just need a straight board as Kit Macchi does now for supportin...
Building the Oonagh Rowing/Sailing Dinghy, Part 4 – Attaching the Keel to the Molds & Transom: Laying in the keel locks in the molds and gets us set up for planking....
Building the Oonagh Rowing/Sailing Dinghy, Part 3 – Ladder Frame, Molds and Transoms: The OONAGH build starts shaping up as Kit dry-fits and fixes the molds and transoms to the strongback. It's easy to get...
Building the Oonagh Rowing/Sailing Dinghy, Part 2 – An Overview of the Building Process: The challenge here was to design a dinghy that could compete with rigid bottom inflatables and we think designer/builder...
Building the Oonagh Rowing/Sailing Dinghy, Part 1 – A Real Rib Alternative: If you've wanted something more aesthetically pleasing to replace your inflatable tender, or a wonderful little family b...

 

Related Guide Posts

Author Title
Steve Stone
Are You Scared of Your Boat? (Reality Check): Are you scared of your boat? After filming hundreds of boatbuilders and craftspeople over the past ten years as they bui...

 

Get access to all content Join Now

Browse by Topic

Wooden Boat Restoration & Repair

Get access to all content Join Now