SOLD – 38′ Hinckley Email Listing to a Friend

(Was $79,500) The Hinckley 38 is a classic yacht with great sailing ability. Unparalleled build quality and with its fin keel design and a skeg-hung rudder she is a joy to sail and you can venture offshore with confidence.

Traditional interior layout with saloon and sea berths outboard, port & starboard; large galley and forward cabin. She has been re-powered and her standing rigging has been replaced. This boat shows pride of ownership and is turn-key, ready for her next owners.

Seller has performed many upgrades and this boat is in exceptional condition.

Please contact us for a showing.

Dimensions
LOA: 37 ft 6 in
Beam: 10 ft 6 in
Displacement: 17500 lbs
Ballast: 6000 lbs

Engines
Total Power: 35 HP

Engine 1:
Engine Brand: Beta 35
Year Built: 2019
Engine Model: 35
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 8
Drive Type: Direct Drive
Engine Power: 35 HP

Accommodations
Number of single berths: 4
Number of double berths: 1
Number of cabins: 1
Number of heads: 1

Beautiful satin varnished Philippine mahogany interior with teak and holly sole. Forward cabin has a V-berth with comfortable cushions and a Lexan hatch for light and ventilation. A hanging locker is to starboard; with a bureau, drawers, and storage to port.

Aft, to port is the separate head with a new Airhead composting toilet. The Scandvik stainless steel sink plumbing includes a flexible shower head. The shower has a curtain and separate sump pump. To starboard are two hanging/storage lockers.

The main cabin has two upper pilot berths and two lower pull-out settee berths, each with lee cloths and drawers between. A mahogany folding table is hinged to the bulkhead.

Aft from the main cabin is the galley which includes a gimbaled three-burner stove and oven, refrigerator/freezer, hot/cold pressure water, and alternate foot pump for fresh water. The water heater has a 6 gallon capacity, heated either by 110v or the engine. Spacious Formica countertops are trimmed with varnished teak.

Cabin
Beautiful interior having had a complete refit with all new sinks, light fixtures, plumbing, countertops, portlight acrylic, portlight screens, stripped all mahogany/teak and teak/holly sole and refinished with satin varnish (2008/2009). Currently in like new condition.
Scandvik stainless sinks
Water filter for galley sink
Adler-Barbour 12v refrigerator/freezer with well insulated box
Excellent cabin lighting with all LED bulbs
Chart light (white or red)
Sunbrella UV-resistant cabin curtains on all portlights
Built-in CD/stereo with speakers
Custom cotton sheets for forward berth.
Chelsea Barometer

Engine
Beta Marine B-35 diesel: New as of June 2019, with only 8.7 hours
Racor primary fuel filter upstream of engine filter
Beta engine instruments installed with new engine
Dripless shaft seal
Full stainless steel exhaust system

Electrical
BLUE Sea Systems 110v panel located under companionway
Multiple 110v outlets with GFCI
House bank batteries: Deka Gel deep cycle batteries – total 408 amp hrs.
Starting bank: Group 31 AMG battery
Xantrex TRUEcharge ™ 40 amp charger for house bank
Xantrex Smart Charge 20 amp charger for starting bank
During previous rebuild in 2008/2009 replaced all wiring to and from batteries and many other areas with properly sized, multi strand tinned Ancor copper wire and fittings, heat shrink at fittings, wires numbered and logged.
Blue Sea high amp breakers on outgoing wiring from battery selectors
New Blue Seas Systems 12v panel and all associated wiring – 2019

Electronics
Raymarine ST-60 sailing instruments
Furuno radar on swing arm in companionway
Garmin 740s color plotter at helm
Standard Horizon VHF wired to GPS for long/lat position for DSC distress signal
Standard Horizon remote Mic at helm
Alpha auto pilot with second controller at helm and remote control
Weems & Plath night watch clock
Secondary depth sounder with cockpit and cabin display

Sails & Rigging
Sutter mainsail – recut and updated by Port Townsend Sails – 2019
North 125 genoa – new UV cover, recut, and updated fittings by Port Townsend Sails – 2019
All new chainplates – 2018 – Brion Toss Rigging
New lazy jacks – 2018 – Brion Toss Rigging
115 yankee
Working jib
Storm jib
Hood spinnaker
Harken MKII furler
All standing rigging replaced with 316 stainless (2009/2010)
All halyards are rope
Primaries, main sheet, and main halyard winches recently replaced with Lewmar Ocean Series ST winches
All lifelines replaced with 316 stainless (2010)
Mast rewired (2009)
Stainless bails added for radome and steaming light (2009)
LED tri-color at masthead

Deck
Ideal V-2Q anchor windlass with chain/rope wildcat; power up/down
Deck wash pump with filter
Leather cover for helm wheel
New Sunbrella dodger -2018 – Port Townsend Canvas
Portlight acrylic and screens replaced (2009)
Teak doors for companionway, varnished, with covers
Sunbrella covers for all exterior teak
Sunbrella full boat winter cover

Safety
Switlik MD2-H six person raft with dual floor and hard canister with hydrostatic release; includes custom Sunbrella cover. Life raft needs to be recertified.
Aluminum cabintop mount for Switlik life raft
EchoMax radar reflector
Lifesling
High water alert
Carbon monoxide sensor in cabin
Two automatic bilge pumps
Two manual bilge pumps

Additional Information
Work/Upgrade 2018/2019

Deka GR4D 970CCA 183AH AGM starting battery
Deka Gel GR8D 12V 225AH house battery
Removed and replaced port and starboard chainplates – Brion Toss Yacht Riggers- Port Townsend
Backstay chainplate removed and replaced – Brion Toss Yacht Riggers – Port Townsend
Repairs to full winter cover – Sea Marine – Port Townsend
Lazyjacks – Brion Toss Yacht Riggers – Port Townsend
New Cutless Bearing – Sea Marine
New dodger with grab rails – Sea Marine – Port Townsend
Purchased AirHead composting toilet – AirHead Direct Order
5/8″ Double-braid docklines – (4) – Fisheries Supply Seattle
Legacy GPSMAP update on SD Card – Garmin Direct Order
Removed existing head and installed new AirHead composting toilet, including pumping – Sea Marine – Port Townsend
Inflatable dinghy – Aleko Products – Seattle – still in the box
Forward hatch cover – Eastside Tend & Awning – Bellevue
Repairs to bilge pumps – Emerald Harbor Marine – Seattle
Replaced fresh water plumbing – removed leaking copper and replaced and updated with plastic tubing, valves, and fittings – Emerald Harbor Marine – Seattle
Removed and replaced all thru-hull hoses and inspected fittings – Emerald Harbor Marine – Seattle
Keel bolts revealed and inspected – Keel bolt pockets refilled and faired
North genoa – New Sunbrella UV Cover – New head, tack, and clew – Sail recut – Carol Hasse – Port Townsend Sails
Sutter mainsail – Recut – Install New Bulls – Tack – Head – Clew – Battens – Carol Hassee – Port Townsend Sails
New Sta Set Genoa Sheets
Install New Tides Marine Strong Track For Main
Install Halyard Restrainer and Inspect Rigging – Brion Toss Yacht Riggers – Port Townsend
New Beta Instrument Panel And Associated Beta Wiring Harness
New Beta 35 Marine Diesel Engine
New Blue Seas DC Panel And Associated Wiring
New 2000 GPH Rule Gold Series Bilge Pump and New Hoses
4 GPM Jabsco Diaphram Bilge Pump and New Hoses
Bilge Painted With Pettit EZ Bilge White
New Shift and Thottle Cable
New Cable For Auto Pilot
All New Hoses For Engine Cooling Including Raw Water And Through Hull
New PSS Shaft Seal
New Three Blade RH Prop
New Fuel Lines and New Racor Primary Fuel Filter Prior to Engine Filter
Hull Buffed And Waxed
Top Deck Detailed

Read More