All Videos » Boat Building Tools & Tips

Having the right wooden boat building tool in the right condition makes jobs go smoothly and safely. Because we don’t sell advertisements we are free to name specific makes and models of the best tools for your boat project; our expert boat builders give you honest boat building tool recommendations to help you set up your own shop like a pro.

Title
Scribing & Maintaining a Waterline, With a Batten and a Pull-Saw: Havilah Hawkins shows us how to make and maintain a classic looking waterline on your wooden boat....
Metalworking Techniques, Part 1 – Heat-Bending Metal Rod for a Traveler: In this series, Erica Moody will demystify metalworking — showing the basics of how to work metal with portable tools...
Making a Caulking Mallet with Antique Tool Guy Jeff Pearson: Antique tool guy Jeff Pearson takes us through the process of how to make a caulking mallet....
Shortcuts for Shaping Complex Wooden Boat Pieces – Part 4, Using Hand Tools For Final Shaping: This week Eric Blake demonstrates using hand tools for the final shaping of complex curves and tapers of wooden boat pie...
How to Build the Off Center Skiff, Part 20 – Launch Day!: In the final part of our series, Eric Blake and Havilah Hawkins' work comes to a completion as the kids gather to launch...
How to Build the Off Center Skiff, Part 19 – Oil, Plugs & Paint: This week Eric Blake, Havilah Hawkins and the kids are finishing up the Off Center Skiff with oil, plugs and paint....
How to Build the Off Center Skiff, Part 18 – Seat-Risers & Seats: Eric Blake, Havilah Hawkins and the kids build and install the seat-risers & seats on the Off Center Skiff....
How to Build The Off Center Skiff, Part 17 – Inwales & Outwales: This week Eric Blake and the Brooklin Skiff Club kids are hand-riveting the inwales and outwales into place on the Off C...
How to Build The Off Center Skiff, Part 15 – Finishing the Bottom & Flipping the Boat: The kids are hard at work finishing up the puttying, taking the boat off the molds, screwing down the bottom stringers,...
Shortcuts Shaping Complex Wooden Boat Pieces – Part 2, Cutting the Tapers: We return to the Brooklin Boat Yard with Eric Blake as he walks us through cutting the tapers in shaping complex wooden...
How to Build the Off Center Skiff, Part 14 – Caulking Cotton: As the series continues, Havilah Hawkins demonstrates how to traditionally caulk the skiff with caulking cotton....
Bit Brace Essentials, Part 2 – Techniques & Uses: We return to Harry Bryan's shop to learn the essential techniques and uses of the bit brace....
Ingenuity at Work & Play, with Harry Bryan: Harry Bryan takes us off-the-grid again with his ingenuity in both work and play....
Shortcuts for Shaping Complex Wooden Boat Pieces, Part 1 – Making the Blank: We join Eric Blake at the Brooklin Boat Yard where he breaks down how to recreate compound tapered shapes for wooden boa...
Bit Brace Essentials, Part 1 – Knowing What To Look For: Join Harry Bryan as he walks us through bit braces and knowing what to look for.  ...
Cool Shop Tips #4, Harry Bryan’s Sawhorse Clamp: Forget the power miter saw - this original sawhorse clamp design by Harry takes a sawhorse and clamp to create a handy t...
The Boltinator: An Ingenious Tool for Extracting Keel Bolts & Bearings: Got keel bolts to pull? Or perhaps you'd like to pull a hole in the time-space continuum? This shop-built tool does the...
Fasteners & Fastening, Part 5 – Drilling and Tapping Stainless Steel: We finish our trip into the shop with a look at tricks on drilling and tapping stainless steel....
Handsaws for Boatbuilding, with Harry Bryan: When it comes to handsaws, whether you're working with plywood or natural stock, Harry Bryan knows which saw is the be...
Fasteners & Fastening, Part 4 – Drilling & Tapping Bronze: Head into the metal shop to learn the order of events of how to drill and tap bronze pieces together....
Fasteners & Fastening, Part 3 – Machine, Pan & Hex Head Screws with Wood: See more fasteners in action with tips on using machine, pan and hex head screws in woodworking projects....
How to Use Epoxy, Part 2 – Getting a Smooth Finish for Paint or Varnish: Eric Blake continues his walkthrough on how to use epoxy to get a smooth finish for paint or varnish at the Brooklin Bo...
Fasteners & Fastening, Part 2 – Countersinking Screws & Setting Bungs in Wood: Fasteners in action: Proper techniques for putting stuff together using a variety of fasteners....
Fasteners & Fastening, Part 1 – Naming of the Screw: Get up to date on today's fasteners and their specific uses....
Making a Pilot House Door, Part 2 – Finish & Fit: Woodworking techniques abound as Tony Grove finishes and fits the frame and panel constructed door for a Northwest Fish...
How To Use A Handsaw, Square & Bevel Crosscuts: In an era of loud, whirring machines, Harry takes us back to the simplicity and precision of the crosscut saw as he show...
Building Boat Furniture Using Plywood and Cleat Construction: We visit the Grove Woodworking School on Gabriola Island in British Columbia where boatbuilder Tony Grove demystifies th...
Cool Shop Trick: Applying a Herreshoff-Style Sheerstrake to a Cold Molded Alerion 26: Cold molded boats don’t really have individual planks, so sheerstrakes, especially ones in the Herreshoff style that a...
Lie-Nielsen Woodworking Tools, A Glimpse at How They’re Made: Tom Lie-Nielsen is the man behind the kind of woodworking tools that we would like to pass down to our kids and grandk...
Plane Talk & Spokeshaves – Boat Building Hand Tools: Boat building hand tools expert, OCH Guide and well known traditional tool expert, Harry Bryan, takes us through his col...
Cool Shop Tip #3 – Chipper Guide for Plane Sharpening: Who knew the cap iron on your hand plane could be used as a guide when sharpening the blade? A handy little plane sharpe...
Sanding Station: Tired of the sawdust from sanding? See the sanding station system Bill Thomas put together to more than solve that prob...
Smooth Planes – The Good, The Bad, & The Ugly with Harry Bryan: Ever wondered what all those moving parts in your hand plane were for? Well Harry takes a couple of smooth planes apart...
Cool Shop Tips, Part 2 – ‘Bed of Nails’ for Painting: Simple ways of painting spars and boat parts can come in instant flashes of genius and wisdom after twenty years of expe...
Cool Shop Tips, Part 1 – Manning Benches: A saw horse and a rugged, portable, versatile work bench all in one, or as the case may be, two. Geoff Kerr introduces u...
Blade Sharpening Part 3 – Sharpening Planer Blades: Sharpening planer blades on a big machine can be especially daunting. And yet Harry takes it on with aplomb, as he shows...
Essential Boat Building Tools – Clamps: A few helpful hints on getting the right clamps for your boat building shop from a master builder of wooden boats....
Sharpening Plane Blades, Part 2 – with Harry Bryan: A mid-winter follow-up journey over the border to Canada gives us the opportunity to get a lesson from master boatbuilde...
Best Boat Building Tools, Part 3 – Industrial Handheld: In this video on boat building tools, master builder Eric Blake takes us inside the Brooklin Boat Yard again to look at...
Versa Vise Review, with Harry Bryan: When we first saw this video, we called to order two of these clever little versa vises immediately. And they haven't le...
Boat Building Hand Tools, The Basic Tool Kit – with Harry Bryan: Ignoring many of the tools now flooding the marketplace, Harry Bryan shows us the basic boat building tools you will nee...
Sharpening Plane Blades, Part 1 – with Harry Bryan: A mid-winter journey over the border to Canada gives us the opportunity to get a lesson on sharpening plane blades from...
Best Boat Building Tools, Part 2 – Stationary Tools: Inside the Brooklin Boat Yard, master builder Eric Blake goes through what he considers the “standard” boat building...
Best Boat Building Tools, Part 1 – Small Handheld Power Tools: Inside the Brooklin Boat Yard, master builder Eric Blake talks boat building tools and what he considers to be the woode...

 

Related Guide Posts

Author Title
Harry Bryan
Am I A Luddite?: Am I A Luddite? Some Thoughts On Where We Are And Where We’re Going On a recent trip across the country by train, I fe...
Maynard Bray
Carvel Construction; John’s Bay Boat Co. Builds a Wooden Lobster Boat, Part I: Some 40 years ago, Peter Spectre, then of International Marine Publishing Co. engaged me to edit Royal Lowell's manuscri...
Guest Author
IMPERFECTION AND THE WOODEN BOAT, A guest post by Larry Cheek: At every turn in the building or renovation of a wooden boat blooms a pivotal question: How good should I make it? For a...
Harry Bryan
DIY Vise Block; A Useful Gizmo For Clamping: This DIY vise block allows holding pieces that have non-parallel faces, but is not of my own design.  I am quite sure...
Harry Bryan
My Thoughts on Power Tools: Last winter as we completed the planking of a 26’ lap-strake powerboat, I was offered the use of a random orbit sander...
Guest Author
Sharing Custom Toolbox Ideas; A Guest Post Hosted by OffCenterHarbor: Hosted by OffCenterHarbor.com co-founder Maynard Bray This first installment of our what will be an ongoing blog on cust...
Maynard Bray
Antique Ingenuity; The Shaw & Tenney Oar Lathe: For about 150 years this oar lathe has been making long square wood round. You start with a rough-sawn shaft of square c...
Harry Bryan
A Tale of Two Block Planes: Harry Bryan Reviews the Stanley 12-960 Low Angle Block Plane: Last December I bought a Stanley 12-960 low-angle block plane from a local hardware store.  There were three choices...
Harry Bryan
Rattail Reamers You Can Make Yourself. Also, a Neat Chainsaw Sharpener—by Harry Bryan:  A RATTAIL FILE MADE INTO A HANDY REAMER A rattail file is round, fairly coarse, and tapered at one end.  A 3/8” rat...

 

Related Flotsam

Posted By Title
Maynard Bray
Louie Sauzedde and “Tips From a Shipwright”: We thought you might enjoy the videos below from Louis Sauzedde. Louis is one of the most experienced and ingenious boat...
Bill Mayher
Old School Tools, Made by Hand: Gila, NM is a long way from a deep water anchorage, but I'm sure many of us can identify with the values imbued in this...
Eric Blake
The Foot Powered (Treadle) Lathe: How's this for off center craftsmanship? Here's Chris' "about" info on his YouTube Channel: I have a passion for traditi...
Steve Stone
There’s No Place Like Here: Liberty Tool: Every woodworker has a favorite used tool barn, if they're lucky. Over the winter, I took my son Jack (age 11) on the ro...

 

Get access to all content Join Now

Browse by Topic

Marine Art
Wooden Boat Restoration & Repair

Get access to all content Join Now