OffCenterHarbor.com

Topics Engaged In

Viewing 10 topics - 1 through 10 (of 10 total)

- Topic
- Voices
- Posts
- Last Post
- Fairing the Hull
  Started by: Bob Donaldson in: ARRIBA/OONAGH – 12a – Epoxy Finishing Inside & Out
- 4
- 5
- 2 years, 8 months ago
  ROBERT HANIS
- Pillow block specs
  Started by: Ben Tupper in: ARRIBA / OONAGH – 18 – Oarlock
- 3
- 4
- 4 years ago
  THOMAS HATCH
- BOAT DOLLY
  Started by: Doug Hermann in: ARRIBA / OONAGH – 26 – Gear & Outfitting
- 2
- 2
- 4 years ago
  THOMAS HATCH
- Dinghy mode
  Started by: Scott Berger in: ARRIBA / OONAGH – 24 – Launchings & Photo Gallery
- 3
- 4
- 5 years ago
  Scott Berger
- Preparing the Inner Hull
  Started by: Bob Donaldson in: ARRIBA/OONAGH – 12a – Epoxy Finishing Inside & Out
- 3
- 4
- 5 years ago
  THOMAS HATCH
- SHEER PLANKS
  Started by: Doug Hermann in: ARRIBA / OONAGH – 09 – Hanging the Shear Plank
- 2
- 2
- 5 years, 2 months ago
  THOMAS HATCH
- Tom Hatch – Building ARRIBA in Kent, Ohio
  Started by: THOMAS HATCH in: BUILDERS’ BOATHOUSE (Meet the ARRIBA/OONAGH Builders)
- 2
- 2
- 5 years, 2 months ago
  John Haswell
- Dynel on hull
  Started by: Doug Hermann in: ARRIBA / OONAGH – 08 – Protecting the Bottom (with Dynel)
- 2
- 4
- 5 years, 2 months ago
  Doug Hermann
- John Haswell – Building ARRIBA in New Zealand
  Started by: John Haswell in: BUILDERS’ BOATHOUSE (Meet the ARRIBA/OONAGH Builders)
- 3
- 4
- 5 years, 2 months ago
  THOMAS HATCH
- Dynel
  Started by: Bob Donaldson in: ARRIBA / OONAGH – 08 – Protecting the Bottom (with Dynel)
- 3
- 6
- 5 years, 2 months ago
  THOMAS HATCH

Viewing 10 topics - 1 through 10 (of 10 total)